| If
it's advanced--It's MHI!
Customer Appreciation
Specials
---------------------- ----------------------
Technical Articles About MHI
Technical
Articles |
HGA2 Superheated Steam Generator 1kW
HGA2
Supersaturated
steam with over 50% specific humidity possible from HGA2.
Model |
Output |
Power |
Voltage |
HGA2
750-1 |
Superheated
Steam |
1KW |
110V
50/60Hz |
With full
power to HGA2 (held vertically) by direct plugging in to 120 VAC wall
socket. Controls available.
Pump
Setting # (PP/120/12) Contact MHI for price |
HGA2
Steam Exit Temperature, C Typical range (may vary in your unit-depends on use and other factors) |
Specific
Humidity (typical only) Note the very high values in red. |
4 |
621-627 |
call |
5 |
577-583 |
call |
6 |
534-548 |
call |
7 |
452-464 |
0.1478 |
8 |
132-162 |
0.1754 |
9 |
121-158 |
0.3350 |
9.9 |
98-110 |
0.6286 |
At high
settings condensation could occur depending on use.
Note specific
humidity is not the
relative humidity (please see articles
for definitions if unfamiliar with humidity terminology).
HGA2 Superheated Steam Generator with stand.
Peristaltic
Pump Motor - controls steam quantity
Part # PP/120/12
optional
tubing shown
quick connect and disconnect
continuously adjustable
0-32 mL/min
120V
Peristaltic
Pump Setting Number |
Water
Flow Rate mL/minute at 25°C |
4 |
0.2 |
5 |
2.0 |
6 |
4.5 |
7 |
7.5 |
8 |
8.9 |
9 |
17.0 |
10 |
31.9 |
Click here for High Efficiency Steam Recirculating Ovens
Article
on HGA output for steam and superheated steam.
Read an article on "Drying with steam or drying with air - a case study for clay, wood, food processing, etc".
Patents granted and pending
Copyright © 2000 - 2008 MHI, Inc. All rights reserved.